Meross Outdoor Dimmer Plug MPD100US for String Lights IP44 Smart Outlet

Note
 

1. MPD100 supports 2.4GHz Wi-Fi only. Please make sure your desired place is covered by strong 2.4GHz Wi-Fi.
2. IP44Waterproof: It can only be used to prevent liquid spraying and cannot be wet in rain for a long time.
3. 150W maximum for LED and CFL bulbs, 400W maximum for INC. Make sure to use dimmable bulbs.
4. Press the button twice to turn off the device, and press the button once to adjust the light to 10%, 20%, 30%, 50%, and 100% respectively.

Installation Guide

1. Download the Meross app
2. Plug MPD100 into an outlet near your Wi-Fi router
3. Open Meross app and simply follow the inbuilt setup wizard for configuration
4. Relocate your MPD100 to the desired place. No extra configuration is required.

VOICE CONTROL

Thanks to compatibility with Alexa and Google Home, you can dim the light from 1% to 100% with your voice while you're sitting on the couch, or lying in bed. Whether it's outdoor or indoor lighting, we make it easy for you.

REMOTE CONTROL

This is a smart plug that you can control even when you’re traveling away from home - for example, you can turn on your patio at night to reduce robberies. (Remember, both your plug and your phone should be connected to Wi-Fi or LAN.)

SCHEDULE & TIMER

With the schedule and timer feature, simply set a timer for the Smart Plug will automatically turn on/off its appliance. You can also program it to turn on at dawn and off at dusk, providing you with a healthy sleep schedule.

SUIT FOR DIFFERENT DIMMABLE LIGHT BULBS
MPD100 is compatible with a variety of light bulbs: LED&CFL (150W maximum) and INC(400W maximum).

Note: Please make sure your light bulbs are dimmable and confirm the power before using.

Status LED:
Red:

Flashing rapidly(twice/sec): Initialization/ Wi-Fi connecting mode/ Reset/ Firmware upgrading mode
Flashing slowly(once/sec): Configuration mode.
 

Green:

The socket is ON/OFF
 

Press the button twice to turn off the device
Press the button once to turn on / adjust the light to 10%, 20%, 30%, 50%, and 100% respectively
Press and hold(for 5 seconds)until Status LED flashes red rapidly to initiate the factory reset process

Note:

1. Supports 2.4GHz Wi-Fi network only.

2. When you connect to Wi-Fi:

Firstly connect the WiFi to the device
Then connect to the home network